Blast furnace slag samples with phase separation structure were prepared by re-melting and then water quenching process. By use of XRD,DTA and SEM technologies in combination with mechanical property experiment,the structure characteristics of samples were determined and their effects on cementitious reactivity were investigated. The results show that the samples with phase separation have better cementitious reactivity than sample with homogenous glass and sample with crystalline phases,which mainly contributes to its glass structure with coexistence of Ca-O rich phase and Si-O rich phase. Moreover,the amorphous samples possess hydrability which is affected by their formation process,since phase separation extends the range of possible Ca-rich crystalline phases.
In the background of little reuse and large stockpile for iron ore tailings, iron ore tailing from Chinese Tonghua were used as raw material to prepare cementitious materials. Cementitious properties of the iron ore tailings activated by compound thermal activation were studied. Testing methods, such as XRD, TG-DTA, and IR were used for researching the phase and structure variety of the iron ore tailings in the process of compound thermal activation. The results reveal that a new cementitious material that contains 30wt% of the iron ore tailings can be obtained by compounded thermal activation, whose mortar strength can come up to the standard of 42.5 cement of China.
Corrosion of steel rebar is the most important durability problem of reinforced concrete. The aim of this research was to investigate the corrosion behavior of steel rebar in simulated pore solutions and gangue-blended cement mortar. The simulated pore solutions were based on the pore solution composition of gangue-blended cement. The pH and Cl-concentration of simulated pore solutions had significant effects on corrosion potential. However,an increase in pH reduced the influence of Cl-concentra-tion on corrosion potential. The corrosion behavior of steel rebar in gangue-blended cement is different from that in simulated solutions. The gangue cementitious mortar surrounding steel rebar provides stable passivity environments for steel,leading to a decrease in ion diffusion coefficients. Alternating current impedance (ACI) analysis results indicated that the indicator Rc for concrete resistivity is higher for gangue mortar than for ordinary Portland cement (OPC),which improves its corrosion potential. The results from energy dispersive X-ray analysis (EDX) showed more aluminates and silicates at the rebar interface for gangue-blended cement. These aluminates improve the chloride binding capacity of hydrates in mortar,and increase the corrosion protection of steel rebar.
The interaction of Si anions with AI sites during the hydration process was observed by NMR, IR and SEM to understand the reaction mechanism of the hydrates formation mixed with oil shale calcined at different temperatures. As the reaction progressed,the coordination of AI (IV, V, and VI) changed almost completely to IV, when mixed with oilshale calcined at 700^(。)C. However, when mixed with oil shale calcined at 400^(。)C, some6-coordination of AI still remained in the hydrates. Under the function of alkaline solutions,which were produced with the hydration of clinker, a certain amount of Si and AI atomsdissolved or hydrolyzed from aluminosilicate, formed geomonomers in solutions, and thenpolycondensed to form networks.
A new method for estimating the degree of [SiO4]4-polymerization of coal gangue is presented. The method uses the relative bridging oxygen number (RBO) based on nuclear magnetic resonance (NMR) techniques. X-ray diffraction (XRD) and 29Si NMR techniques have been used to study phase transitions and silicate polymerization of coal gangue calcined at different temperatures or co-calcined. It has been found that phase transition of clay minerals causes silicate polymerization to change with temperature. In this study, cementing activity and RBO were determined to be inversely related. Generally, activated coal gangue with lower RBO had better cementitious activity.
The aim of this study is to understand the relationship between the polymerization degree and cementitious activity of iron ore tailings.In light of the poor usage of iron ore tailings,stockpile samples from Tangshan were studied in terms of their ability to become cementitious materials.Compound thermal activation was used to improve the cementitious properties of the tailings,while analyzing methods,such as X-ray diffraction (XRD),infrared spectroscopy (IR),nuclear magnetic resonance (NMR),and X-ray photoelectron spectrometer (XPS),were employed to study the changes in phase and structure under different activation conditions.The results reveal clear relationships between the binding energies of Si2p and O1s,polymerization degree,and cementitious activity of iron ore tailings.
