A convenient technique is reported in this note for measuring elastic modulus of extremely soft material for cellular adhesion. Specimens of bending cylinder under gravity are used to avoid contact problem between testing device and sample, and a beam model is presented for evaluating the curvatures of gel beams with large elastic deformation. A self-adaptive algorithm is also proposed to search for the best estimation of gels＇ elastic moduli by comparing the experimental bending curvatures with those computed from the beam model with preestimated moduli. Application to the measurement of the property of polyacrylamide gels indi- cates that the material compliance varies with the concentrations of bis-acrylamide, and the gels become softer after being immersed in a culture medium for a period of time, no matter to what extent they are polymerized.
Xiaoling Peng Jianyong Huang Lei Qin Chunyang Xiong Jing Fang
A hybrid technique of combining moire measurement and analytical solution is developed to separate the normal and the tangential components of distributed contact stresses between two co-plane bodies. The moire interfe-rometry offers the displacement fields near the deformed contact zone, from which the tangential strains and boundary slopes of the deformed configurations can be evaluated. Those experimental results provide boundary conditions for the discrete integration of Flamant＇s solutions, to inversely compute the separated components of the contact stresses.
Ultra-thin membrane with nanoscale through hole has great potential in biomedical applications, where precise controllability of porosity, pore size and film thickness is urgently required. The present work proposed a cost-effective way to prepare the ultra-thin nanoporous film with a promising controllability. Monodispersed nanoparticle, rather than photoresist, is used as the sacrificial material for this new lift-off process. By releasing the particles, holes can be achieved with predeter-mined characters. A 110 nm-thick nanoporous aluminum film with well-controlled pore＇s diameter was successfully fabricated to validate the technique. The technique has wider process window and better applicability than other nanofabrication methods.
