A hybrid gas/liquid pulsed discharge plasma reactor using a porous ceramic tube is proposed for dye wastewater treatment.High voltage pulsed discharge plasma was generated in the gas phase and simultaneously the plasma channel was permeated through the tiny holes of the ceramic tube into the water phase accompanied by gas bubbles.The porous ceramic tube not only separated the gas phase and liquid phase but also offered an effective plasma spreading channel.The effects of the peak pulse voltage,additive gas varieties,gas bubbling rate,solution conductivity and TiO 2 addition were investigated.The results showed that this reactor was effective for dye wastewater treatment.The decoloration efficiency of Acid Orange II was enhanced with an increase in the power supplied.Under the studied conditions,97% of Acid Orange Ⅱ in aqueous solution was effectively decolored with additive oxygen gas,which was 51% higher than that with argon gas,and the increasing O 2 bubbling rate also benefited the decoloration of dye wastewater.Water conductivity had a small effect on the level of decoloration.Catalysis of TiO 2 could be induced by the pulsed discharge plasma and addition of TiO 2 aided the decoloration of Acid Orange Ⅱ.
Pulsed discharge plasma has exhibited active potential to prepare low molecular weight chitosan. In the present study,the viscosity of chitosan solution was decreased noticeably after treated with pulsed corona discharge plasma. An experimental investigation on electrical characteristics of pulsed corona discharge plasma in chitosan solution was conducted with a view toward getting insight into discharge process. Factors affecting I-V curve,single pulse injection energy and pulse width were studied. Experimental results showed positive effect of pulsed peak voltage on discharge plasma in chitosan solution. Pulse-forming capacitor greatly influenced the discharge form,and 4 nF was observed as a suitable value for efficiently generating stable discharge plasmas. As the electrode distance was larger than 10 mm,it had slight impact on discharge plasma due to the excellent conductive-property of chitosan solution. The injection energy significantly increased with air flow rate,while the pulse width hardly changed as the air flow rate increased from 0.5 m3/h to 1.0 m3/h. This study is expected to provide reference for promoting the application of pulsed corona discharge plasma to chitosan solution treatment.
