The optimization of the Earth-moon trajectory using solar electric propulsion is presented. A feasible method is proposed to optimize the transfer trajectory starting from a low Earth circular orbit （500 km altitude） to a low lunar circular orbit （200 km altitude）. Due to the use of low-thrust solar electric propulsion, the entire transfer trajectory consists of hundreds or even thousands of orbital revolutions around the Earth and the moon. The Earth-orbit ascending （from low Earth orbit to high Earth orbit） and lunar descending （from high lunar orbit to low lunar orbit） trajectories in the presence of J2 perturbations and shadowing effect are computed by an analytic orbital averaging technique. A direct/indirect method is used to optimize the control steering for the trans-lunar trajectory segment, a segment from a high Earth orbit to a high lunar orbit, with a fixed thrust-coast-thrust engine sequence. For the trans-lunar trajectory segment, the equations of motion are expressed in the inertial coordinates about the Earth and the moon using a set of nonsingular equinoctial elements inclusive of the gravitational forces of the sun, the Earth, and the moon. By way of the analytic orbital averaging technique and the direct/indirect method, the Earth-moon transfer problem is converted to a parameter optimization problem, and the entire transfer trajectory is formulated and optimized in the form of a single nonlinear optimization problem with a small number of variables and constraints. Finally, an example of an Earth-moon transfer trajectory using solar electric propulsion is demonstrated.
This article presents a systematic direct approach to carry out effective optimization of a wide range of continuous-thrust Earth-orbit transfers with intermediate-level thrust acceleration,including minimum-time (with a single burn arc) and mini-mum-fuel (with multiple burn arcs) transfers. With direct control parameterization,in which the control steering programs of burn arcs are interpolated through a finite number of nodes,the optimal control problem is converted into the parameter optimi-zation proble...
Low-thrust Earth-orbit transfers with 10^- 5-order thrust-to-weight ratios involve a large number of orbital revolutions which poses a real challenge to trajectory optimization. This article develops a direct method to optimize minimum-time low-thrust many-revolution Earth-orbit transfers. A parameterized control law in each orbit, in the form of the true optimal control, is proposed, and the time history of the parameters governing the control law is interpolated through a finite number of nodal values. The orbital averaging method is used to significantly reduce the computational workload and the trajectory optimization is conducted based on the orbital averaging dynamics expressed by nonsingular equinoctial elements. Furthermore, Earth＇s shadowing and perturbation effects are taken into account. The optimal transfer problem is thus converted to the parameter optimization problem that can be solved by nonlinear programming. Taking advantage of the mapping between the parameterized control law and the Lyapunov control law, a technique is proposed to acquire good initial guesses for optimization variables, which results in enlarged convergence domain of the direct optimization method. Numerical examples of optimal Earth-orbit transfers are presented.
Gao Yang Academy of Opto-Electronics,Chinese Academy of Sciences,Beijing 100190,China
