您的位置: 专家智库 > >

国家自然科学基金(20092197)

作品数:2 被引量:4H指数:1
相关作者:陈淑英常国威刘升阳黄玉多更多>>
相关机构:辽宁工业大学更多>>
发文基金:国家自然科学基金更多>>
相关领域:金属学及工艺一般工业技术更多>>

文献类型

  • 2篇中文期刊文章

领域

  • 2篇金属学及工艺
  • 1篇一般工业技术

主题

  • 1篇英文
  • 1篇熔体
  • 1篇熔体温度
  • 1篇铸态
  • 1篇铸态组织
  • 1篇温度
  • 1篇力学性能
  • 1篇镁合金
  • 1篇合金
  • 1篇SOLIDI...
  • 1篇SOLIDI...
  • 1篇AZ31B镁...
  • 1篇CRYSTA...
  • 1篇CRYSTA...
  • 1篇MAGNES...
  • 1篇力学性
  • 1篇FASHIO...

机构

  • 1篇辽宁工业大学

作者

  • 1篇黄玉多
  • 1篇刘升阳
  • 1篇常国威
  • 1篇陈淑英

传媒

  • 1篇中国有色金属...
  • 1篇Intern...

年份

  • 1篇2013
  • 1篇2012
2 条 记 录,以下是 1-2
排序方式:
Research of {0001} crystal orientation for magnesium alloys solidified in a fashion of cellular crystals被引量:1
2012年
The magnesium alloy grew in a fashion of cellular crystals during the process of unidirectional solidification, and the {0001} crystal face orientation in the cast ingot of the magnesium alloy was studied. The theoretical model and methodology were set up, and a cor-responding experiment was carried out to verify the theoretical analysis results. The experimental results indicate that the {0001} crystal face of magnesium crystals parallels to the width direction for the thin-plate cast ingot when the magnesium grows in a manner of cellular crystals. The separation angle between the {0001} crystal face of magnesium crystals and the vertical axis line of the cast ingot is about 62° for the circular column cast ingot, which distributes in cone-type. The theoretical analysis results are basically in agreement with the experimental ones of previous literatures and this paper.
Guo-wei ChangShu-ying ChenQing-chun LiXu-dong YueYi-hui Qi
关键词:SOLIDIFICATION
熔体温度对AZ31B镁合金铸态组织及力学性能的影响(英文)被引量:3
2013年
采用自制的电阻炉研究熔体温度对AZ31B镁合金凝固组织与拉伸性能的影响。结果表明:在温度低于850℃水冷时,金属型AZ31B镁合金铸锭等轴枝晶的尺寸随着熔体温度的升高呈直线下降,超过850℃后变化不大。组织中第二相呈现出先细化后粗化的变化规律。AZ31B镁合金试样的抗拉强度、伸长率和屈服强度随着熔体温度的提高而先快速增大后略有减小,熔体温度为850℃时试样的抗拉强度达到260MPa,屈服强度达到75.4MPa,伸长率达到27.57%,比熔体温度为750℃时的分别提高了15%、13%和61%。DSC分析表明,升高熔体温度使凝固开始点温度降低,临界晶核半径减小,从而增加了熔体中的过冷度,提高了熔体中非均匀形核率,是镁合金晶粒细化和拉伸性能提高的主要原因。
陈淑英常国威黄玉多刘升阳
关键词:AZ31B镁合金铸态组织力学性能熔体温度
共1页<1>
聚类工具0