An active spot beam delivery system for heavy ion therapy has been developed based on the Cooling Storage Ring at HIRFL-CSR, where the pencil carbon-ion beams were scanned within a target volume transversely by a pair of orthogonal （horizontal and vertical） dipole magnets to paint the slices of the target volume and longitudinally by active energy variation of the synchrotron slice by slice. The unique techniques such as dose shaping via active energy variation and magnetic deflection constitute a promising three-dimensional conformal even intensity-modulated radiotherapy with heavy ions at HIRFL-CSR. In this paper, the verification of active energy variation and the calibration of steerable beam deflection are shown, as the basic functionality components of the active spot-scanning system. Additionally, based on the capability of creating homogeneous irradiation fields with steerable pencil beams, a radiobiological experiment like cell survival measurement has been performed aiming at comparison of the radiobiological effects under active and passive beam deliveries.
For precision delivery of the Bragg peak of a heavy-ion beam to a target volume in ion beam therapy, it is necessary to know the tissue stopping power. A general approach to solve this problem in ion beam therapy is to convert X-ray CT （computed tomography） numbers into water-equivalent path length （WEPL） coefficients using a CT-WEPL calibration curve for all voxels traversed by the beam. This work aims at establishing a CT-WEPL coefficient calibration curve for the heavy ion therapy project at IMP, so as to compute the range of carbon ion beams in tissues easily according to the patient CT data. Several tissueequivalent materials were applied to measure their WEPL coefficients using a high-energy carbon ion beam in this work. A CT-WEPL calibration curve was obtained through fitting the measured data, which can be used directly for dose optimization and facilitates the design of patient treatment plans significantly at IMP.
