A multi-band absorber composed of high-permittivity hexagonal ring dielectric resonators and a metallic ground plate is designed in the microwave band. Near-unity absorptions around 9.785 GHz, 11.525 GHz, and 12.37 GHz are observed for this metamaterial absorber. The dielectric hexagonal ring resonator is made of microwave ceramics with high permittivity and low loss. The mechanism for the near-unity absorption is investigated via the dielectric resonator theory. It is found that the absorption results from electric and magnetic resonances where enhanced electromagnetic fields are excited inside the dielectric resonator. In addition, the resonance modes of the hexagonal resonator are similar to those of standard rectangle resonators and can be used for analyzing hexagonal absorbers. Our work provides a new research method as well as a solid foundation for designing and analyzing dielectric metamaterial absorbers with complex shapes.
We propose to achieve a high-efficiency wideband flat focusing reflector using metasurfaces. To obtain the wide band,the polarization conversion mechanism is introduced into the reflector design, based on the fact that the reflection phases of cross-polarized waves are linear in quite a wide band. This facilitates the design of wideband parabolic reflection phase profile. As an example, we design two reflective focusing metasurfaces with one- and two-dimensional in-plane parabolic reflection phase profiles based on elliptical split ring resonators（ESRRs）. Both the simulation and experiment verify the wideband focusing performance in 10.0–22.0 GHz of the flat reflectors. Due to the wide operating band, such reflectors have important application values in communication, detection, measurement, imaging, etc.
In this paper,we propose a novel transmit/reflect switchable frequency selective surface(FSS)in millimeter wave band based on the effective medium theory under quasi-static limit,which is designed with square-hole elements cut from continuum dielectric plates.The building elements of the surface are composed of all dielectric metamaterial rather than metal material.With proper structural design and parameters tuning,the resonance frequencies can be tuned appropriately.The frequency response of the surface can be switched from that of a reflecting structure to a transmitting one by rotating the surface 90°,which means under different incident polarizations.The reflective response can be realized due to the effect of electric and magnetic resonances.Theoretical analysis shows that the reflective response arises from impedance mismatching by electric and magnetic resonances.And the transmitting response is the left-handed passband,arises from the coupling of the electric and magnetic resonances.In addition,effective electromagnetic parameters and the dynamic induced field distributions are analyzed to explain the mechanism of the responses.The method can also be used to design switchable all-dielectric FSS with continuum structures in other frequencies.
In this paper, we design a varactor-tunable metamaterial absorber （MA）. The tunable MA is based on a mushroom-type high impedance surface （HIS）, in which varactors are loaded between adjacent metal patches to adjust the capacitance and tune the resonance frequency, the primary ground plane is etched as the bias network to bias all of the varactors in parallel, and another ultra-thin grounded film is attached to the bottom. Its absorption characteristics are realized for electrically dielectric loss. The simulated values of a sample indicate that a tunable frequency range from 2.85 GHz to 2.22 GHz is achieved by adjusting the varactor capacitance from 0.1 pF to 2.0 pF, and better than 0.97 absorbance is realized; in addition, the tunable frequency range is expanded from 4.12 GHz to 1.70 GHz after optimization.
We propose a broadband perfect polarization conversion metasurface composed of copper sheet-backed asymmetric double spilt ring resonator（DSRR）. The broadband perfect polarization convertibility results from metallic ground and multiple plasmon resonances of the DSRR. Physics of plasmon resonances are governed by the electric and magnetic resonances. Both the simulation and measured results show that the polarization conversion ratio（PCR） is higher than 99%for both x- and y-polarized normally incident EM waves and the fractional bandwidth is about 34.5%. The metasurface possesses the merits of high PCR and broad bandwidth, and thus has great application values in novel polarization-control devices.
In this paper, we show that circular polarization-keeping reflection can be achieved using reflective metasurfaces. The underlying physical mechanism of the polarization-keeping reflection is analyzed using a reflection matrix. A wideband circular polarization-keeping reflector is demonstrated using N-shaped resonators. Both the simulation and experiment results show that the polarization-keeping reflection can be achieved with a high efficiency larger than 98% over the frequency range from 9.2 GHz to 17.7 GHz for both incident left- and right-handed circularly polarized waves. Under oblique incidence, the bandwidth increases as the incident angle varies from 0°to 80°. Moreover, the co-polarization reflection is independent of the incident azimuth angles.
