An effective method to design structural Left-handed material(LHM) was proposed. A commercial finite element software HFSS and S-parameter retrieval method were used to determine the effective constitutive parameters of the metamaterials, and topology optimization technique was introduced to design the microstructure configurations of the materials with desired electromagnetic characteristics. The material considered was a periodic array of dielectric substrates attached with metal film pieces. By controlling the arrangements of the metal film pieces in the design domain, the potential microstructure with desired electromagnetic characteristics can be obtained finally. Two different LHMs were obtained with maximum bandwidth of negative refraction, and the experimental results show that negative refractive indices appear while the metamaterials have simultaneously negative permittivity and negative permeability. Topology optimization technique is found to be an effective tool for configuration design of LHMs.
Model I quasi-static nonlinear fracture of aluminum foams is analyzed by considering the effect of microscopic heterogeneity.Firstly,a continuum constitutive model is adopted to account for the plastic compressibility of the metallic foams.The yield strain modeled by a two-parameter Weibull-type function is adopted in the constitutive model.Then,a modified cohesive zone model is established to characterize the fracture behavior of aluminum foams with a cohesive zone ahead of the initial crack.The tensile traction versus local crack opening displacement relation is employed to describe the softening characteristics of the material.And a Weibull statistical model for peak bridging stress within the fracture process zone is used for considering microscopic heterogeneity of aluminum foams.Lastly,the inffuence of stochastic parameters on the curve of stress-strain is given.Numerical examples are given to illustrate the numerical model presented in this paper and the effects of Weibull parameters and material properties on J-integral are discussed.
